Dedeco TC Radial Discs 6″

Dedeco TC Radial Discs 6″

£6.17£11.28 incl VAT

Dedeco Sunburst 6″ TC Radial Disc

6” TC Radial Discs. For use on a bench grinder. Available in 6 grades

Hubs sold separately, discs available individually.

Sold Each

Dedeco Sunburst discs are a great alternative to wire and nylon. Safer, flexible, longer lasting and faster to use.

Choose an option

£6.17£11.28 incl VAT

Add to cart
Buy Now

Dedeco Sunburst 6″ TC Radial Disc

Dedeco TC Radial Discs 6″ is also available in a 40 piece bulk pack for greater economy and brush width flexibility.

Use with: flange & telescope adapter

What does the TC shape mean?

Curved, thinner bristles for greater conformabiltiy than TA and TS models.  Single-directional.

What are Dedeco Sunburst Radial Discs?

SUNBURST discs are a great alternative to wire and nylon. Safer, flexible, longer lasting and faster to use, the unique range is made from thermoplastic bonded abrasive and is used by aerospace, auto, marine and the jewellery industry. See more information about our Dedeco Radial discs in our catalogue. 

Why is Dedeco Sunburst so effective?

No matter what the material being worked, SUNBURST RADIAL DISCS are the “absolute best” for finishing & polishing hard-to-access areas without removing detail or causing flat spots.

The sharp, clean, specially treated ceramic abrasive grain imbedded throughout their thin flexible bristles enable them to work faster and last longer than rubber wheels, brushes, buffs and conventional sanders.

Sunburst Radial Discs generate minimal dust and heat and eliminate the need for polishing compound.

Dedeco Sunburst Benefits

CONFORMABILITY – Flexible bristles conform to contours, cracks and corners while working equally well on flat surfaces.

LONG-LASTING – Uniformly blended bristles guarantee extended wear life and a consistent, uniform finish.

COOL RUNNING – Generates minimal heat reducing potential damage or distortion to the work surface.

OPERATING SPEEDS – Recommended operating speeds for most applications is 3,000 – 18,000 RPM (5,000 for wood working). Lower speeds allow a softer touch, greater flexibility and more subtle results. Higher speeds provide more aggressive material removal. Using the

tip of the bristles with light pressure maximizes disc life.

MODULAR – Use a single disc for tight areas like slots and grooves or stack them for larger surface areas.

Check out the rest of the Dedeco range here

Additional Information

Weight 0.5 kg

Coarse – 80g – Yellow, Medium – 120g – White, Standard – 220g – Red, Fine – 400g – Blue, Extra- Fine – 6 Micron – Peach, Ultra-Fine – 1 Micron – Green, Flange and Adapter, Taper Bore