Start with the system you already run. If you are new to ENESKA, the ENESKAMicro 600 set is the current generation.
| System | What It Covers | Choose It When |
|---|---|---|
| ENESKAMicro 600 Set | Control box, JEM 50 brushless motor and JIR 40R rapid chuck handpiece with 3mm collet | You are starting with ENESKA or replacing an older micromotor system. |
| ENESKA 600 Motors, Handpieces & Accessories | Motors, straight and angled heads, belt grinder, filing machine, reduction gear and adaptors | You run an ENESKAMicro 600 and want to add a motor or handpiece. |
| Eneska 4-1 Handpiece Attachments | Handpieces for the J-BM 50S and J-BM 50HT motors | You run an Eneska 4-1 system. Priced on application. |
| Eneska 3-2 Handpieces & Accessories | Handpieces and the FC64 foot switch for the 3-2 system | You run an Eneska 3-2 system. Priced on application. |
To compare ENESKA with other brands, browse all Micromotor Systems.
Compatibility Between ENESKA Generations
- ENESKA 600: 600 handpieces fit the JEM 40R and JEM 20R motors directly. Other motors need a JECR adaptor.
- ENESKAMicro 600 control box: adaptors are available to run Eneska 4-1, Eneska 3-2 and older NSK handpieces.
- Eneska 3-2: 3-2 handpieces can be used on the Eneska 4-1 system with the JECN 01 T adaptor.
- NSK Espert 500: the Eneska 4-1 shares the Espert 500 platform, so genuine NSK parts such as the ENK-500T motor and EHR-500 straight attachment are interchangeable with it.
Check compatibility before ordering. Motor, cable and adaptor combinations vary between generations, so contact Moleroda with the model numbers on your control box, motor and handpiece.
Need Help Choosing an ENESKA System?
Contact Moleroda with the models you already run, the workpiece material, the tools you use and the type of work. Moleroda also services and repairs ENESKA micromotors in house.
Frequently Asked Questions (FAQs)
No. ENESKA is joke Technology's own range, while NSK (Nakanishi) is a separate Japanese manufacturer. Earlier ENESKA systems used NSK engineering, so some Eneska 4-1 parts are interchangeable with the NSK Espert 500.
ENESKA 600 handpieces fit the JEM 40R and JEM 20R motors directly. Other motors need an adaptor, so contact Moleroda with your motor and control box model before ordering.
Adaptors are available to connect earlier ENESKA and older NSK handpieces to the ENESKAMicro 600. Contact Moleroda with the handpiece model to confirm the adaptor required.
Most straight and angled handpieces are supplied with a 3mm collet, and the heavy duty straight handpieces take 6mm. Other collet sizes are available for many handpieces.
Yes, on request. These handpieces are priced on application, so contact Moleroda for current availability.
Yes. Moleroda carries out servicing and repairs of ENESKA micromotor systems in house.



