Micromotor Motor Handpieces
ENK-500T – Nakanishi NSK Espert 500 – Premium Brushless Torque Motor
Micromotor Systems
Saeshin OZ Black Micromotor System with H500 Handpiece and Foot Pedal
Micromotor Control Boxes
Speeds and torque are the manufacturers' figures for the handpiece supplied with each system.
| System | Max Speed | Torque | Choose It When |
|---|---|---|---|
| Saeshin Brillian B350 | 35,000 RPM | 3.0 N·cm | You want a compact system for jewellery making, wax carving, stone setting and detail polishing, with the H350 handpiece and foot control. |
| Saeshin OZ Black | 50,000 RPM | 7.8 N·cm | You need more torque for deburring, blending and polishing in toolroom, mould repair or jewellery work, with a brushless digital control unit, the H500 handpiece and foot pedal. |
| ENESKAMicro 600 | 40,000 RPM | 8.4 N·cm | You want a modular system for mould and die polishing, with interchangeable straight, angled and filing heads added as the work requires. |
| ENESKAmobile | 40,000 RPM | 6.5 N·cm | You work away from the bench or power supply; it runs a brushless motor for up to 3 hours at full load on battery. |
| Mobile Micromotor System | 33,000 RPM | — | You need a light, rechargeable unit for occasional work away from the workshop, with around 140 minutes of continuous use per charge. |
Choosing a Micromotor
- Speed and torque: torque is what holds the speed when a burr or stone is under load. A higher-torque handpiece suits larger burrs, stones and heavier deburring; a lighter handpiece suits fine detail and engraving.
- Brushless motors: brushless motor handpieces have no carbon brushes to wear out, so they need very little maintenance and run smoothly over long sessions.
- Collet and shank size: the systems here are supplied with a 3mm collet. The collet must match the shank of the tool exactly, so check your burrs and mounted points before buying. Further sizes are listed in Collets.
- Hand or foot control: a foot pedal leaves both hands free to steady the work and lets you start, stop and change speed without looking away.
- Modular systems: ENESKA and NSK Espert 500 systems take interchangeable attachments, such as straight, angled and filing heads. Eneska 4-1 attachments share the NSK Espert 500 platform, but ENESKA and NSK are separate manufacturers.
- Mains or battery: mains-powered systems suit the bench; battery systems suit work on large parts or away from the workshop.
Building or repairing a system? Browse motor handpieces such as the NSK Espert 500 ENK-500T, handpiece attachments, control boxes and micromotor accessories.
Micromotor, Flexible Shaft or Rotary Tool?
| Tool | How It Works | Best Suited To |
|---|---|---|
| Micromotor | Motor in a slim handpiece, with electronic speed control at a separate unit | Precise, low-vibration work at high speed over long sessions |
| Flexible shaft machine | A motor hung above the bench drives the handpiece through a flexible shaft | Work that needs more torque, such as heavier stock removal with larger tools |
| Hobby rotary tool | Motor and controls built into one hand-held body | General and occasional DIY tasks |
For a fuller comparison, read Dremel vs Micromotors and Pendant Motor vs Micromotor System.
Need Help Choosing a Micromotor?
Contact Moleroda with the work you do, the materials you work on, the shank sizes of your tools and any system you already own.
Frequently Asked Questions (FAQs)
Micromotors are used for precision grinding, polishing, deburring and engraving. Typical uses include jewellery making, mould and die polishing, toolroom work and dental laboratory work.
A micromotor has the motor in a slim handpiece and the speed control in a separate unit, so it runs with less vibration and is easier to hold for long periods. A hobby rotary tool such as a Dremel combines the motor and controls in one body and suits general, occasional tasks.
The collet must match the shank diameter of your tools exactly. The systems here are supplied with a 3mm collet, and other sizes are available for many handpieces.
The Saeshin Brillian B350 and OZ Black are supplied with foot control, and the ENESKAMicro 600 control box has a connection for one. Check each product page for what is included.
No. ENESKA is JOKE Technology's product line and NSK (Nakanishi) is a separate Japanese manufacturer. Eneska 4-1 attachments share the NSK Espert 500 platform, so they fit NSK Espert 500 motors such as the ENK-500T.
Yes. Motor handpieces, attachments, control boxes, collets and accessories are listed in the micromotor sub-categories. Contact Moleroda for parts that are not listed.








