Water-Soluble Diamond Suspension for Lapping and Polishing
Diamond suspension, also called diamond slurry or liquid diamond compound, disperses micron-graded synthetic diamond evenly in a water-soluble liquid carrier. The liquid spreads the abrasive evenly across a lap or larger flat surface, which suits flat lapping, lapping plates and dosing systems on hard materials such as hardened steel, carbide, ceramics and technical metals.
It is supplied in a 100g bottle in ten grades from 45 micron down to 1/10 micron, and follows the same micron grades and colour coding as our diamond paste. The carrier is water with dipropylene glycol, which keeps the diamond evenly dispersed. It is manufactured in the UK.
Use only water-soluble lubricants. Diamond suspension is not compatible with the oil-soluble Lapping Fluid; choose the water-soluble Lapping Fluid if extra lubrication is needed.
Choose the Right Micron Grade
The suspension uses the same colour for each grade as the equivalent diamond paste.
| Grade | Colour | Choose It For |
|---|---|---|
| 45 micron | Purple | Stock removal and initial lapping |
| 25 micron | Mahogany | Surface preparation |
| 16 micron | Brown | Removing the coarse scratch pattern |
| 10 micron | Red | Pre-polishing |
| 6 micron | Yellow | Pre-polishing and refinement |
| 3 micron | Green | Polishing |
| 1 micron | Blue | Fine polishing |
| 1/2 micron | Grey | Fine and mirror finishing |
| 1/4 micron | Grey | Mirror finishing |
| 1/10 micron | Grey | Final mirror finishing |
Start with the finest grade that removes the existing marks, then move through finer grades, cleaning the lap and component between each one. The table below shows how the grades group into stages.
| Stage | Micron Grades | Use |
|---|---|---|
| Stock removal | 90, 60, 45 | Removing stoning marks and heavier surface defects (60 and 90 micron in paste only) |
| Surface preparation | 25, 16 | Removing the coarse scratch pattern and refining geometry |
| Pre-polish | 10, 6 | Smoothing the surface ahead of polishing |
| Polishing | 3, 2, 1 | Bringing up a polished finish (2 micron in paste only) |
| Fine and mirror finishing | 1/2, 1/4, 1/10 | Final finishing for a high-gloss or mirror surface (1/2 micron in suspension only) |
1/2, 1/4 and 1/10 micron are all a similar grey. Check the grade on the bottle label before use.
Need a grade not listed? Grades from 1/4 to 90 micron that are not listed can be supplied on request. Contact Moleroda to enquire.
How to Use Diamond Suspension
Shake before use.
Shake the bottle thoroughly before each use so the diamond is evenly dispersed through the liquid.
- Shake the bottle. Mix the suspension fully before every application.
- Apply sparingly. Apply a small amount from the bottle to the lap, plate, pad, cloth or felt tool. For spraying or automatic dosing, decant into a suitable spray bottle or dosing system; the suspension is supplied in a plain bottle.
- Top up little and often. Reapply small amounts regularly to maintain an even abrasive film rather than flooding the surface.
- Lubricate with water-soluble fluid only. If extra lubrication is needed, use the water-soluble Lapping Fluid. Do not use the oil-soluble fluid with suspension.
- Clean between grades. Clean the lap and component thoroughly and keep separate tools or plates for each grade.
Wear safety glasses and suitable gloves, work in a well-ventilated area and do not allow the product to enter drains.
Diamond Suspension or Diamond Paste?
| Product | Choose It When |
|---|---|
| Diamond Suspension | You need even coverage on a lapping plate or larger flat surface, or a liquid for dosing. Water-soluble, in 100g bottles, 45 to 1/10 micron. |
| Diamond Polishing Compound (Diamond Paste) | You are polishing detailed areas with felts, bobs or lapping sticks and want the abrasive to stay where it is applied. Water- and oil-soluble, 5g, 10g or 20g syringes, 90 to 1/10 micron. |
| Lapping Fluid | You need a lubricant. Choose the water-soluble formulation for diamond suspension, in 250ml, 1 litre or 5 litres. |
Need a tool or machine for lapping?
Apply suspension with Mounted Felt Lapping Sticks, Wooden Lapping Sticks or RODA Mounted Felt Bobs, or browse Diamond Polishing & Lapping for the full range.
Product Specifications
| Product type | Diamond suspension (liquid diamond compound) |
|---|---|
| Abrasive | Micron-graded synthetic diamond |
| Carrier | Water-soluble (water 40–70%, dipropylene glycol 20–50% by weight) |
| Micron grades | 45, 25, 16, 10, 6, 3, 1, 1/2, 1/4, 1/10 micron |
| Colour coding | Same colours as diamond paste |
| Pack | 100g plain bottle |
| Unit of sale | Each (one bottle) |
| Compatible lubricant | Water-soluble Lapping Fluid only |
| Other grades | 1/4 to 90 micron grades not listed available on request |
| Manufacture | Manufactured in the UK |
| Typical applications | Flat lapping, lapping plates, mould and die finishing, precision components and metallographic preparation |
Need Help Choosing a Grade?
Contact Moleroda with the workpiece material, the lapping method or machine you are using, the current surface condition and the finish you need.

























![Mounted Wooden Lapping Sticks [600x600]](https://moleroda.com/wp-content/uploads/2021/11/woodenbobsL-2.jpg)





