Micro-Mesh Starter Kit for Glass Ghosting & Heat Stain Trials
The Micro-Mesh Glass Restoration Starter Kit is designed for professional users who want to test Micro-Mesh Regular on suitable surface-level marks found on tempered or toughened glass.
It is a simple entry point for trialling the recommended glass finishing sequence:
6000 → 8000 → 12000
Use this kit to test whether Micro-Mesh is suitable for improving visible ghosting, heat stain, heat rash or skunk marks before committing to larger quantities or alternative formats.
What’s Included?
| Contents | Purpose |
|---|---|
| 2 x Micro-Mesh Regular 6000 sheets | Main working grade for reducing visible ghosting, heat stain and skunk marks |
| 1 x Micro-Mesh Regular 8000 sheet | Refines the surface after the 6000 stage |
| 1 x Micro-Mesh Regular 12000 sheet | Final ultra-fine polishing stage |
The 6000 grade is supplied in a higher quantity because it is normally the main working grade in this process.
Typical Applications
Suitable For
This kit is suitable for controlled trials on:
- glass ghosting
- heat stain marks
- heat rash
- skunk marks
- light furnace marks
- faint roller-side marks
- localised surface haze
- tempered or toughened glass finishing trials
Not intended for
This kit is not intended as a guaranteed solution for every type of glass defect.
It may not be suitable for:
- deep scratches
- chips
- cracks
- quench marks
- internal optical distortion
- severe surface damage
- defects below the glass surface
What Is Glass Ghosting? Heat Stains, Skunk Marks and Tempered Glass Defects Explained
Glass ghosting is a surface appearance defect that can occur during the tempering process. It [...]
If you are unsure what type of mark you are dealing withHow to Remove Scratches from Glass
A guide to help you remove light scratches from glass
For general scratch removalHow to Use
- Clean the glass thoroughly.
- Test on a sample or non-critical area first.
- Start with Micro-Mesh Regular 6000.
- Refine with Micro-Mesh Regular 8000.
- Finish with Micro-Mesh Regular 12000.
- Clean and inspect the final surface.
How to Remove Heat Stains and Ghosting from Tempered Glass with Micro-Mesh
For a basic hand trial, you will need: If you are testing the process for [...]
Detailed InstructionsThe Next Step
This kit is designed for sampling appropriate Micro-Mesh grades. Once the process has been tested and approved, most users move to the Micro-Mesh format that best suits their workflow:
Micro-Mesh for Glass: Should You Use Sheets, Rolls, Discs or Pads?
The best Micro-Mesh format depends on how the glass is being worked, not just on [...]
Compare Micro-Mesh FormatsTechnical Specifications
| Specification | Details |
|---|---|
| Product Type | Micro-Mesh glass finishing starter kit |
| Abrasive Type | Micro-Mesh Regular |
| Included Grades | 6000, 8000, 12000 |
| Sheet Size | 6″ x 6″ |
| Kit Contents | 2 x 6000, 1 x 8000, 1 x 12000 |
| Application | Tempered glass ghosting, heat stain and skunk mark trials |
| Use Method | Hand finishing / process validation |
| Suitable Users | Glass processors, fabricators, restoration teams and finishing specialists |











![[Large] Glass Polishing Kit (5 Pieces with Powders) - 1200 x 900 px 72 dpi](https://moleroda.com/wp-content/uploads/2025/01/Large-Glass-Polishing-Kit-5-Pieces-with-Powders-1200-x-900-px-72-dpi-600x450.jpeg)