Eneska 600 Handpieces
Choose from the following Eneska 600 Handpieces. Please note the following can be used with either a JEM40R motor or a JEM20R motor. (If you have a different motor, you will require an adaptor.)
JEM 50C Compact Motor incl. Rapid Chuck handpiece and motor cable 0100001
This is a motor and handpiece all in one – you cannot change the handpiece.
Brushless Motor
200 Watt output
8,4 N Torque
Continuous speed control up to max 50,000 rpm (limited by control box and handpieces)
Weight: 215g
Noise level: <67 dB a
Dimensions: 27.5mm diameter x 137,6mm
JEHG-20R Heavy Duty large straight hand piece 0100007 Inc. 6mm collet
This larger straight hand piece for taking tools with a 6mm shank.
Collet: 6mm
Speed: max 20,000rpm
Dimensions: 22.5 diameter x 99.5mm
Weight: 141g
JERA 90 20R (90 degree angled head) 0100004 Inc. 3mm collet
Angled heads are perfect to use with discs and pads particularly helpful when working on mould tools and dies when surfaces must be kept flat. Use with our self-adhesive discs.
Collet: 3mm
Speed: max 20,000rpm
Dimensions: 21.8 diameter x 73mm
Weight: 92g
JEAH 60 20R Angled Head 0100011 Inc. 3mm collet
This angled head is perfect for working on hard to reach areas and for a more comfortable working angle. Commonly used with discs or mounted points etc.
Collet: 3mm
Speed: max 20,000rpm
Dimensions 22.5mm diameter x 80.8mm
Weight: 91g
JBS 20R Mini Belt Grinder 0100008
Excellent mini finger belt sander with high toque is easy to use, low vibration and excellent for sanding small detailed welds, sanding and linishing.
Belts are 4 x 300 or 6 x 300 and 8 x 300 sizes fit this belt sander
Speed: max 20,000rpm
Weight: 227g
JMH 20R Hand Filing Machine 0100009
Most popular using with files- diamond files, needle files, ultrafine ceramic stones, mould tool stones. This machine also has speed control. It is the ultimate automatic filling system.
Stroke length: 1mm
Number of strokes: Max 12,00 strokes/min
Speed input: Max 20,000/min
Tool holder – Max 3.2mm diameter
Dimensions: 21,8mm diameter x 125mm
JEM 50R motor up to 50,000 rpm incl. motor cable – 0100020
Power: 200 watts
Speed range: 1,000 – 50,000 rpm
Torque: 8.4 N cm
Dimensions: Ø 27.7 mm x 66.9 mm (without clutch)
Weight 143.6 g (without motor cable)
The following handpieces are for use ONLY with the ENESKA JEM 40R Motor 0100002:
JIR 40R Rapid Chuck Handpiece 0100005 Inc. 3mm collet
Collet: 3mm
Speed: Max 40,000rpm
Dimensions: 26mm diameter x 90mm
Weight: 112g
JBMXLH 40R with extended shaft 126mm 0100006L Inc. 3mm collet
Collet: 3mm
Speed: Max: 40,000rpm
Dimensions: 12,6mm diameter / 21,8mm diameter x 198,5mm
Weight: 152g
JIH 40R Rapid Chuck Handpiece 0100015
Collet: 3mm
Speed: 40,00rpm
Dimensions: 21mm diameter x 80mm
Weight 112g
JEEA Extension 300mm- 0100013 Ideal for reaching down in bores and getting into tricky spaces.
Please note: if you have a JEHR500 or JBM50T motor that you will be using these handpieces with, you will require an adaptor:
JECR 01 Adaptor 0100091 for use with an ENESKA 3 -2 Handpiece
Speed: Max: 30,000rpm
JECR 02 Adaptor 01000090 for use with an ENESKA 4-1 Handpiece
Speed: Max: 30,000rpm
The Eneska 600 is a very versatile system as you can use this huge range of handpieces with the motors and control boxes. With this range of hand pieces so many application and industries would find this micro drill very useful. The tool was initially designed for the mould tool making industry, where angled heads, files and rotary tools are all used regularly. Here at Moleroda we have diversified this application for deburring many machined and ground parts for industry like oil and gas parts, aerospace, automotive (porting etc) for cleaning, polishing and deburring high precision parts which require very high quality finish. We have more recently been introducing this tool into fabrication, foundry, general polishing shops, jewellery making and also sculpture creation.