Die & Pencil Grinders

Die grinders and pencil grinders hold carbide burrs, mounted points and small polishing tools in a collet and spin them at high speed for grinding, deburring, blending and polishing. They are used in toolrooms, mould and die repair, precision engineering and fabrication, wherever material needs removing by hand with control.

The range covers air micro pencil grinders up to 70,000 rpm for fine detail, 6mm-collet straight, extended and angle-head die grinders for general work, and NSK Impulse and Rotus precision air grinders. For workshops without compressed air, there are electric options: Suhner USK straight grinders, the SG6 variable-speed straight grinder and the Proxxon IBS/E drill/grinder.

Burrs, points and collets are sold separately. Match the collet to the tool shank, then choose carbide burrs, mounted points or mounted polishing tools for the job.

All Die & Pencil Grinders

Showing all 21 results

Call us to find out the current price for this product
+
This product has multiple variants. The options may be chosen on the product page
Price range: £755.35 through £1,158.89 incl VAT
£132.04 incl VAT
Buy Now
£89.68 incl VAT
Buy Now
+
This product has multiple variants. The options may be chosen on the product page
Price range: £16.87 through £25.67 incl VAT
+
This product has multiple variants. The options may be chosen on the product page
£478.80 incl VAT

Die & Pencil Grinders

Suhner Low Speed Grinder USK 3R

£1,190.82 incl VAT
Buy Now
£1,897.03 incl VAT
Buy Now

Choosing the Right Grinder

Choose by the size of the tools you run, the detail you need and the power source in your workshop.

TypeModelsSpeedColletChoose It When
Micro pencil grinders (air)Puma AT-3170 and AT-3180, BIAX SRD3-55/2, JOKE Turbo G 180/60, Dotco Type A55,000–70,000 rpm3mm on most modelsYou deburr and grind fine detail with small burrs and points in tight spaces.
Precision angle-head air grindersNSK Impulse NA45-230, NA45-400 and NA90-23023,000–40,000 rpm3mmYou polish and deburr detailed mould features with small stones, discs and burrs at an angle.
Air motor systemNSK Rotus set with foot control and airline kit3,000–30,000 rpm3mm (straight handpiece)You want a complete high-torque air system with foot control and interchangeable handpieces.
6mm die grinders (air)Puma AT-7032 mini, AT-7033 straight, AT-7033L extended, AT-7034 90° and AT-7136M 115° angle heads; DG65 heavy duty 90°20,000–25,000 rpm6mm; 3mm, 1/8″ and 1/4″ availableYou need general grinding and deburring, extra reach, or an angle head for disc work on flat surfaces.
Electric straight grindersSG6, Suhner USK 6-R and USK 3R1,600–5,800 rpm, variableSuhner 6mm; 8mm and 12mm availableYou run larger wheels and mops (SG6 up to 150mm), polish heat-sensitive materials, or have no compressed air.
Electric rotary toolProxxon IBS/E, with the NG 5/E mains adapter for 12 V Micromot toolsapprox. 5,000–22,000 rpm, 100 W1.0–3.2mm collets suppliedYou do light bench, model or detail work with small bits.

Air or Electric?

  • Air tools are small and light for their speed: the BIAX pencil grinder weighs 93g and the Puma AT-3170 200g. They need a compressed air supply, ideally filtered, regulated and lubricated with an air filter kit.
  • Electric tools need no compressor and offer variable speed. The Suhner USK 3R is a low-speed, high-torque grinder suited to larger mops and temperature-sensitive materials such as plastics.

For hand-held work at lower speeds with interchangeable handpieces, also compare Flexible Shaft Machines and Micromotors.

Collets, Tools and Speed

Match the collet to the shank exactly. Puma grinders take 3mm, 1/8″, 6mm and 1/4″ Puma collets; check the collet sizes listed on each product page before ordering tools.

Never exceed the maximum operating speed of the mounted tool. A micro pencil grinder can run far faster than many mounted points and polishing tools are rated for, so check the tool’s rating against the grinder’s speed.

Need Help Choosing a Grinder?

Contact Moleroda with the workpiece material, the tool shank sizes you use, whether you have compressed air and the type of work.

Frequently Asked Questions (FAQs)

A pencil grinder is slim, light and very fast, usually with a 3mm collet, for fine detail work. A die grinder has a larger body, usually a 6mm collet and more torque, for general grinding, deburring and disc work.

Air grinders are lighter and faster for their size but need a compressed air supply. Electric grinders need no compressor and give variable speed, with low-speed models suited to larger wheels and mops.

Puma grinders take 3mm, 1/8″, 6mm and 1/4″ collets. The DG65 takes 6mm as standard with 3mm, 1/4″ and 1/8″ available, and Suhner USK grinders take 6mm with 8mm and 12mm available.

Carbide burrs, mounted points, vitrified points, flap wheels, diamond points and RODA mounted tools, provided the shank matches the collet and the tool is rated for the grinder’s speed.

Check the pressure and air consumption on each product page. A filtered, regulated and lubricated supply protects the air motor, and Moleroda supplies air filter kits for this.