Intelligent Extraction for Heavy-Duty Industrial Applications
The BOFA DustPRO 1000 iQ is engineered for the effective removal of dust, swarf, and fine particulate generated during high-demand industrial processes.
Typical applications include:
-
CNC routing and machining
-
Drilling and production processes
-
Grinding and finishing
-
Industrial engraving
-
Continuous production lines
With significantly higher airflow and filter capacity than other DustPRO units, the DP1000 iQ is designed for high-output environments where consistent extraction performance is critical.
Who is the DustPRO 1000 iQ for?
The DustPRO 1000 iQ is best suited to:
-
Heavy-duty industrial applications
-
High dust volume environments
-
Continuous production processes
-
Workshops requiring maximum airflow and filter capacity
-
Applications requiring intelligent monitoring and control
-
Handling combustible dust when used alongside the Spark Arrestor 2
Need help deciding which BOFA Extraction Unit is right for your operation?
If your application is machine-based but lower volume, consider DustPRO Universal
If you require multi-user extraction, consider DustPRO 400
Extraction Units
BOFA DustPRO Universal Standalone Dust Extraction Unit – Industrial HEPA Extraction System
Extraction Units
BOFA DustPRO 400 Dust Extraction Unit – Industrial HEPA Extraction System (1 or 2 Ports)
For more details
or
Contact our experts for advice
Key Features & Benefits of The DustPRO 1000 iQ
Dual-Stage Filtration
HEPA Filtration (99.995% Efficiency)
The DustPRO 1000 iQ incorporates a high-efficiency HEPA filter capable of removing 99.995% of particles at 0.3 microns.
This helps:
-
Improve air quality
-
Reduce airborne contamination
-
Protect operators
-
Support for workplace dust control compliance
Extraction Filters
BOFA DustPRO 1000 iQ Replacement HEPA Filter – Part No. 1UA1030394
100L High-Capacity Bag Pre-Filter
The system features an extra-large 100-litre dust bag filter, the largest in the range. This significantly increases holding capacity compared with smaller DustPRO units.
Benefits include:
-
Handles high particulate volumes
-
Reduces maintenance frequency
-
Extends HEPA filter life
-
Supports continuous operation
Extraction Filters
BOFA DustPRO 1000 iQ Replacement Filter Bag – Part No. 1UA1030395
Brushless Blower Technology
The DustPRO 1000 iQ uses a brushless high-performance blower, designed to operate for extended periods in demanding industrial environments.
Benefits include:
-
Reduced motor wear
-
Lower maintenance costs
-
Consistent airflow performance
-
Long operational lifespan
Intelligent iQ Operating System
The BOFA iQ Operating System provides real-time monitoring and control of extraction performance.
Key capabilities include:
-
Real-time airflow monitoring
-
Filter condition monitoring
-
Automatic airflow adjustment
-
Digital display interface
-
Performance data tracking
The system can automatically increase blower speed to maintain airflow as filters become restricted, helping ensure consistent extraction performance.
Reverse Flow Air (RFA) Technology
BOFA’s Reverse Flow Air (RFA) technology slows airflow and redirects air movement to allow larger particulate to drop into the filter chamber before reaching the main filter media.
Benefits include:
-
Improved particulate capture efficiency
-
Reduced filter loading
-
Extended filter life
Automatic Flow Control
Allows users to preset airflow levels:
-
Maintains consistent extraction
-
Reduces noise
-
Optimises energy usage
-
Protects HEPA filters
Regular maintenance, including periodic filter replacement and visual checks, helps ensure continued airflow performance and supports safe, effective dust extraction.
Compare DustPRO extraction systems
Optional Extras
To enhance functionality and improve operational efficiency, the BOFA DustPRO 1000 iQ can be configured with the following optional features:
Remote Stop/Start Signal (Optional)
The remote stop/start signal allows the extraction unit to automatically switch on and off in sync with your machine.
This means the extractor only runs when your equipment is operating, helping to:
-
Reduce unnecessary energy consumption
-
Lower operating costs
-
Extend filter life and system longevity
-
Improve overall workshop efficiency
System 'OK' Signal (Optional)
The system OK signal alerts you when there is a fault, and when filters are blocked, allowing you to schedule maintenance efficiently.
This helps ensure:
-
Consistent extraction performance
-
Reduced risk of airflow loss
-
Timely maintenance and servicing
-
Protection of internal components
Enquire About Optional Extras
These optional features are available on request and can be configured to suit your specific application.
Ideal Applications
Following our BOFA Workplace Extraction Flow Chart, the DustPRO 1000 iQ is recommended where:
-
Very high volumes of dust are generated
-
Industrial processes require powerful extraction capacity
-
Combustible dust risks may exist (when used with the compatible BOFA Spark Arrestor 2)
-
Continuous heavy-duty extraction is required
This makes the DustPRO 1000 iQ particularly suitable for:
-
Engineering workshops
-
CNC machining environments
-
Industrial grinding & finishing
-
Production manufacturing lines
Technical Specifications
| Specification | Details |
|---|---|
| Part No. | 1U30811619-A-2181-UK |
| Dimensions (H×W×D) | 1205 × 615 × 810 mm |
| Weight | 95kg |
| Airflow / Pressure | 300-750 m³/hr / 60 mbar |
| Filter Bag | 1UA1030395 |
| Filter Bag Capacity | 100 L |
| HEPA Filter | 1UA1030394 |
| HEPA Filter Efficiency | 99.995% @ 0.3 microns |
| Compatible Hose Kit | Hose Kit 2 |
| Voltage | 230 V single phase |
| Frequency | 50/60 Hz |
| Full Load Current | 12.8 amps |
| Noise Level | < 85 dBA |
| Construction | Powder-coated mild steel |
| Approvals | UKCA & CE |
These specifications provide the airflow and filtration capacity required for high-volume industrial dust extraction applications.
Recommended Products for the DustPRO 1000 iQ
Hose Kit
The DustPRO 1000 iQ requires BOFA-KIT2 hose system for connection to the Spark Arrestor 2. Add at check-out or buy separately.
BOFA-KIT2 includes:
-
1 × 2m x 125mm Flexible Hose
-
1 × Jubilee clips for secure installation
Contact us to discuss hose systems from the unit to the dust source.
Extraction Hoses & Accessories
BOFA Extraction Hose Kit 2 – 125mm Hose for connecting DustPRO 1000 iQ to Spark Arrestor 2
Replacement Filters
Filters should be checked regularly and replaced when airflow or extraction performance begins to drop.
Compatible replacement filters for the DustPRO 1000 iQ:
Replacing filters at the right time helps maintain performance, protect internal components, and extend the working life of the unit.
Extraction Filters
BOFA DustPRO 1000 iQ Replacement HEPA Filter – Part No. 1UA1030394
Extraction Filters
BOFA DustPRO 1000 iQ Replacement Filter Bag – Part No. 1UA1030395
Spark Arrestor
The DustPRO 1000 iQ is the only unit in the range suitable for combustible dust applications when used with a Spark Arrestor system. If you’re working with 3D Materials i.e. Titanium or Aluminium or any potentially combustible dust then make sure you’re using alongside the BOFA Spark Arrestor 2.