A Matching Holder and Four Finishing Stones in One Set
Mini Ceramic Super Stone Sets provide everything needed to start fine detail hand finishing with mini ceramic polishing stones in one selected size: a matching holder, two 800 grit (Blue) stones and two 1200 grit (Red) stones.
The 800 and 1200 grit combination covers surface refinement and final stone finishing on detailed features such as mould and die details, precision components, engraving and jewellery. All four stones and the holder share the same cross-section, so they are ready to use together.
The set contains two grades only. Where heavier marks need removing first, add the coarser 180 grit (Yellow) or 300 grit (Light Brown) stones, sold individually in the same size.
Once the set stones are used, replacement stones can be ordered individually without buying another holder.
What’s in the Set
Every set contains the same five items, supplied in the size selected.
| Item | Quantity | Role in the Set |
|---|---|---|
| Mini Ceramic Super Stone Holder | 1 | Holds the stone and sets its projection; matched to the selected stone size |
| 800 grit stone (Blue) | 2 | Surface refinement and smoothing ahead of the final stage |
| 1200 grit stone (Red) | 2 | Final stone refinement before any subsequent polishing |
A grade number does not guarantee a particular surface finish. If a mirror finish is required, plan a final lapping or polishing stage after the 1200 grit stone.
Choose a Set Size
Set sizes refer to the square cross-section of the stones. The holder supplied is always the one made for that stone size.
| Set Size | Stone Dimensions | Holder Supplied |
|---|---|---|
| Small | 0.5 x 0.5 x 50mm | Small propelling holder with a 0.7mm rounded tip |
| Medium | 0.9 x 0.9 x 50mm | Medium propelling holder with a 1.3mm rounded tip |
| Large | 1.4 x 1.4 x 50mm | Large clamping (collet) holder |
Getting Started with Your Set
Control the exposed length.
Expose only as much stone as the feature requires. Excessive projection is a common cause of breakage with such small cross-sections.
- Load an 800 grit stone. In the Small and Medium holders, load the stone like a pencil lead and advance it; in the Large holder, release the clamp, set the stone and re-tighten.
- Set a short projection. Expose only the length needed to reach the feature and check the stone is secure.
- Work with the tip. Present the stone tip at approximately 45 degrees with light, controlled pressure, avoiding sideways loading.
- Clean, inspect and change to 1200 grit. Once the 800 grit has removed the previous marks, clean the stone and component, then refine with the 1200 grit stone.
- Replace stones as needed. Advance or reset the stone as the tip wears, and order replacement stones individually in the same size.
Keep the 800 and 1200 grit stones separate to avoid carrying coarser debris into the finer stage, and wear suitable eye protection when finishing, shaping or shortening stones.
Which Mini Ceramic Stone Option Should I Choose?
| Product | Choose It When |
|---|---|
| Mini Ceramic Super Stone Sets | You want to get started with one size: a matching holder plus two 800 grit (Blue) and two 1200 grit (Red) stones. |
| Individual Mini Ceramic Polishing Stones | You need replacement stones, or the coarser 180 and 300 grit grades. Sold individually in all three sizes. |
| Mini Ceramic Super Stone Holders | You need an additional or replacement holder for 0.5mm, 0.9mm or 1.4mm square stones. Stones are not included. |
| Ultra-Fine Ceramic Stones | You need a 1 x 1 x 100mm square format in finer 1500, 2000 or 3000 grades, used with the CH1 holder. |
Product Specifications
| Product type | Mini ceramic polishing stone set with matching hand holder |
|---|---|
| Unit of sale | One set |
| Set contents | 1 matching holder, 2 x 800 grit (Blue) stones, 2 x 1200 grit (Red) stones |
| Sizes | Small 0.5 x 0.5mm, Medium 0.9 x 0.9mm or Large 1.4 x 1.4mm square |
| Stone length | 50mm |
| Holder mechanism | Propelling-pencil advance for Small and Medium; clamping (collet) adjustment for Large |
| Holder tip diameter | Approx. 0.7mm (Small) and 1.3mm (Medium); the Large holder uses an adjustable collet |
| Working surface | Stone tip |
| Replacement stones | Available individually in 180, 300, 800 and 1200 grit |
Need Help Choosing a Set Size?
Contact Moleroda with the workpiece material, feature dimensions, starting surface condition and required finish.
