Polishing & Lapping Pastes

Polishing and lapping pastes hold a graded abrasive in a paste carrier for controlled lapping, honing and fine polishing. Paste stays where it is applied, so it suits tool, mould and engineering work, valve grinding and the finishing of small or detailed features.

Choose Diamond Paste for very hard materials and mirror finishes, Algalox for aluminium and other soft non-ferrous metals, or Ultra Lapping Paste, a UK-made silicon carbide paste for flat, sealing and mating surfaces and a stocked alternative to Ultralap and Clover compounds.

Choose by the material you are working on and the result you need, then match the lubricant to the paste: some are water-soluble, some oil-soluble.

A paste needs a carrier

Pastes are applied with a felt, wooden or lapping tool, or between mating parts, which controls where the abrasive works.

All Polishing & Lapping Pastes

Showing all 3 results

+
This product has multiple variants. The options may be chosen on the product page
+
This product has multiple variants. The options may be chosen on the product page
Price range: £11.57 through £76.40 incl VAT
+
This product has multiple variants. The options may be chosen on the product page
Price range: £11.74 through £47.02 incl VAT

Choosing a Polishing or Lapping Paste

Paste Choose It When Carrier and Lubricant Grades and Supply
Diamond Paste Lapping and polishing very hard materials such as hardened steel, carbide, ceramics and glass, or where a mirror finish is required Water- and oil-soluble; use with either Lapping Fluid 90 to 1/10 micron, colour-coded; Medium or High concentration; 5g, 10g and 20g syringes
Algalox Refining aluminium and other soft non-ferrous metals where a smooth, duller finish is acceptable Water-soluble; water-soluble Lapping Fluid only 30 to 1 micron aluminium oxide; 20g syringes
Ultra Lapping Paste Lapping and valve grinding for flatness, fit and sealing on valves, seats, sealing faces and mating parts Oil-soluble; oil-soluble Lapping Fluid only 80 to 1200 grit silicon carbide; 100g and 500g tubs

Match the lubricant to the paste. Lapping Fluid is available in oil-soluble and water-soluble formulations. Using the wrong one with a paste will stop it working evenly.

Need even coverage on a lapping plate rather than a paste? See Diamond Suspension and the full paste vs suspension comparison in Diamond Polishing & Lapping.

Lapping or Polishing?

Lapping produces an accurate, flat and usually matt surface; polishing refines it to a brighter finish. Ultra Lapping Paste is a lapping paste for fit and sealing. Algalox refines aluminium to a smooth, duller finish. Diamond paste laps on coarser grades and polishes to a mirror finish on the finest grades, on hard materials.

After lapping, clean off all lapping paste before any polishing stage. A metal polish such as Simichrome or Super Chrome and Stainless Steel Polish can bring up the lustre on suitable metals; both are listed under Metal Polishing Compounds.

Further reading: Expert Advice on Using Diamond Compound, Surface Preparation Before Diamond Polishing and Diamond Polishing on Hardened Tool Steel.

Need Help Choosing a Polishing or Lapping Paste?

If you are unsure which paste is right for the job, contact Moleroda with details of the workpiece material, its current surface condition, the tool or machine you are using and the finish or fit you need. Grades, abrasives and formulations not listed can often be supplied on request.

Frequently Asked Questions (FAQs)

Lapping produces a flat, accurate and usually matt surface, often on a lap or between mating parts. Polishing refines the surface finish and brightness. Diamond paste can do both depending on the grade; Ultra Lapping Paste is for lapping, and Algalox refines aluminium to a smooth, duller finish.

Diamond paste. It is the choice for hardened tool steel, carbide, ceramics and glass, and for mirror finishes.

Algalox, a water-soluble aluminium oxide paste developed for aluminium and other soft non-ferrous metals. It gives a smooth, duller finish rather than a mirror polish.

Ultra Lapping Paste, an oil-soluble silicon carbide paste from 80 to 1200 grit for flat, sealing and mating surfaces.

Use the oil-soluble Lapping Fluid with Ultra Lapping Paste, the water-soluble Lapping Fluid with Algalox, and either with diamond paste.

Both are imported and can be ordered on request, with a lead time of 2–5 weeks. Ultra Lapping Paste is the stocked, UK-made alternative for lapping and valve grinding.

Use a separate tool or felt for each grade and clean the workpiece thoroughly before moving to a finer grade.