Shank Mounted Mandrels & Holders
Extraction Hoses & Accessories
BOFA 2m x 50mm Flexible Extraction Hose – 50mm & 75-50mm Cuff – Part No. 1UA1020110
Extraction Hoses & Accessories
BOFA 50mm Stay-Put Extraction Arm with Funnel (650mm Reach) – Part No. 1UA1020045
Extraction Hoses & Accessories
BOFA 50mm Table Bracket with Clamp for Extraction Arms – Part No. 1UA1020051
Extraction Hoses & Accessories
BOFA Automatic Flush Seal System for Extraction Arms (50mm) – Part No. 1UA1020052
Extraction Units
BOFA DustPRO 1000 iQ Heavy-Duty Dust Extraction Unit – Industrial HEPA Extraction System
Extraction Filters
BOFA DustPRO 1000 iQ Replacement Filter Bag – Part No. 1UA1030395
Extraction Filters
BOFA DustPRO 1000 iQ Replacement HEPA Filter – Part No. 1UA1030394
Extraction Filters
BOFA DustPRO 250 / 400 Replacement Filter Bag – Part No. 1UA1030241
Extraction Filters
BOFA DustPRO 250 / 400 Replacement HEPA Filter – Part No. 1UA1030287
Extraction Units
BOFA DustPRO 250 Light-Duty Dust Extraction Unit – Industrial HEPA Extraction System
Extraction Units
BOFA DustPRO 400 Dust Extraction Unit – Industrial HEPA Extraction System (1 or 2 Ports)
Extraction Filters
BOFA DustPRO Universal Replacement Filter Bag – Part No. 1UA1030170
Extraction Filters
BOFA DustPRO Universal Replacement HEPA Filter – Part No. 1UA1030161
Extraction Units
BOFA DustPRO Universal Standalone Dust Extraction Unit – Industrial HEPA Extraction System
Extraction Hoses & Accessories
BOFA Extraction Hose Kit 1 – For DustPRO 250, DustPRO 400 & DustPRO Universal
Extraction Hoses & Accessories
BOFA Extraction Hose Kit 2 – 125mm Hose for connecting DustPRO 1000 iQ to Spark Arrestor 2
Flexible Shaft Machines
File & Stone Holders
Engraving, Marking & Chamfering
Machines, Tools & Equipment
| Category | Choose It For | Includes |
|---|---|---|
| Micromotors | Fine, controlled work with small burrs, points and mops in a light handpiece | ENESKA, Saeshin and NSK Nakanishi systems, motor handpieces, attachments and control boxes |
| Flexible Shaft Machines | Rotary work that needs more torque, with quick-change handpieces driven by a hanging or floor-standing motor | Suhner, Foredom, JOKE, Bravoprodigy and WeCheer systems, handpieces and spares |
| Die & Pencil Grinders | Self-contained grinding, deburring and polishing with burrs, points and small wheels | Electric grinders from Proxxon and Suhner; air grinders from PUMA, NSK, BIAX and Dotco |
| Bench Polishers & Lathes | Polishing and buffing with mops and wheels on a fixed spindle | Bench polishers, polishing lathes, pedestals and floor-standing extraction hoods |
| Sanders & Surface Finishing | Sanding, linishing and satin finishing of flat surfaces, welds and pipe | Pipe sanders, finger belt sanders, an orbital air sander and surface finishing machines |
| Reciprocating & Ultrasonic Polishing Tools | Stoning, lapping and filing moulds and dies with a short stroke | Air Turbo Lapper, Swing Air Lapper, Diprofil FPL/R and the ENESKAsonic ultrasonic polishing system |
| Engraving, Marking & Chamfering | Marking parts and chamfering holes and edges | PUMA air engraver pen, ENESKAmarker 300 laser marker and Nitto CB-01 chamfering tool |
| Air Tools | Workshops with a compressed air supply that want light, fast handheld tools | Every air tool Moleroda supplies, in one list |
| Tool Mounting & Holders | Fitting abrasives and polishing tools to your machine | Collets, mandrels, spindles and tapers, backing pads, and file and stone holders |
| Work Holding Vices | Holding small parts steady while you work | Magnetic and rotating ball-joint benchtop vices |
| Extraction | Capturing dust from grinding and polishing at source | BOFA DustPRO extraction units, hoods, filters, hoses and arms |
Choosing the Right Drive
Most handheld finishing work comes down to three ways of driving the tool. Bench machines are the fourth option where the part can be brought to the tool.
| Drive | How It Works | Consider |
|---|---|---|
| Micromotor | An electric motor sits in the handpiece, with speed set at a control box or foot control | Compact and light to hold for long periods; check the torque if you plan to run larger tools |
| Flexible shaft | A motor hung above or beside the bench drives the handpiece through a flexible shaft | The motor provides the torque while the handpiece stays slim; allow room for the shaft to run without tight bends |
| Compressed air | An air motor in the tool runs from a compressor | Light for its speed; needs a clean, regulated air supply at the pressure and flow stated for the tool |
| Bench machine | A mains motor drives one or two fixed spindles | Suits mops, wheels and larger parts; pair it with extraction |
Check the shank or collet size first. Burrs, mounted points and mandrels are made with set shank diameters, so confirm the machine's collet range against the tools you already use. Collets for many machines are listed in Collets.
Workshop Equipment and Related Systems
- JOKE Ergo Worktable: a worktable for finishing work.
- JOKE ultrasonic cleaning tanks: for removing polishing compound and residue from parts.
- ENESKArecoat 85: a hard metal coating set.
- Safety & Lighting: lights, magnifiers and Optivisors for close work.
Finishing parts in batches? Machines for processing many parts at once are listed under Mass Finishing, including vibratory finishing machines, shot blasting cabinets, the MagForce 650 magnetic finisher and waste water systems. Laser and micro welders are listed under Precision Welding.
Need Help Choosing a Machine?
Contact Moleroda with the workpiece material, the finish you need, the tools you plan to run and your power or air supply.
Frequently Asked Questions (FAQs)
It depends on the work. Micromotors suit fine, detailed work in a light handpiece, while flexible shaft machines suit work that needs more torque. Compare the speed, torque and collet range on each product page.
Only for air tools. Micromotors, flexible shaft machines, bench polishers and the electric grinders and sanders run from mains power, and the ENESKAmobile runs from a battery.
It varies by machine. Each product page lists what is supplied, and further collets, mandrels and backing pads are listed in Tool Mounting & Holders.
Yes. The Extraction category includes BOFA DustPRO extraction units with their filters, hoses and arms, plus extraction hoods.
They are listed under Mass Finishing, which covers machines that process many parts at once.
Yes. Contact Moleroda with the workpiece material, the finish you need and the tools you plan to run.



























